|
Known
Issues in Production Version 8.9.2.1002
|
|
Reference
No
|
Description
|
Affected
OS's
|
|
2688481
|
Errors seen after volume data
verification on expanded RAID volumes
|
Vista, XP
|
|
2688477
|
Fail to modify Recovery Volume via
"Volume Modify"
|
Vista, XP
|
|
2688400
|
No illustration & detail
appear in IMSM Basic View while RAID1 is Rebuilding
|
Vista, XP
|
|
2688383
|
Port Number and Number of Disks
shows incorrect in Basic Mode View
|
Vista, XP
|
|
2688382
|
No information of RAID0
"Failed" appear in IMSM Basic View
|
Vista, XP
|
|
2549948
|
Creation of a RAID0 volume fails when disk used for creation is
a spanned or dynamic disk
|
Vista
|
|
2519035
|
D-state cycling single disk during initialization 3 drive RAID5
causes volume to fail after pulling power to a single drive
|
Vista
|
|
2518139
|
User Interface Basic mode displays unknown port when 2 disks
have smart errors
|
Windows XP
|
|
2332390
|
JPN: inconsistent font style and font size in Create Recovery
Volume dialog
|
Vista, Windows XP
|
|
106842
|
'Volume Creation Completed' message covered by Intel Matrix
Storage Manager User Interface
|
Windows XP
|
|
2330169
|
CHS: Next button corrupted on Welcome screen of Create Recovery
Volume Wizard, Convert Recovery Volume to RAID 1 Wizard, and Modify Recovery
Volume Wizard.
|
Vista
|
|
2552285
|
Unable to create RAID volume when sufficient drives are present
after hot-remove/reinsert
|
Windows XP-64
|
|
2553015
|
When initiating RAID1 rebuild will get message “Wizard unable to
start rebuild process” but rebuild happens
|
Windows XP
|
|
2330162
|
User Interface Progress dialog: progress bar missing, bitmap
corrupted or missing, or cut text
|
Vista
|
|
2553091
|
Check for Correct Recovery Volume, selecting BACK during
creation causes recovery drive to change
|
Vista-64
|
|
2554032
|
Partition disappeared but the ‘disk’ did not in Vista failing RAID 10 testing
|
Vista
|
|
2554217
|
IOMeter* sequential writes on 6-disk R5 slow
|
All OS’s
|
|
2554610
|
IAAMonitor App not responding while shutdown after Safe Mode installation
|
Windows XP
|
|
2554680
|
File write performance degraded with Gen II drives and Cache On
|
Vista, Windows XP
|
|
2553965
|
Unable to load driver using f6 during system repair or system
restore process under Vista
|
Vista, Vista-64
|
|
77332
|
Failure to enumerate disk causes crash in Intel Matrix Storage
Manager
|
Windows XP
|
|
2553384
|
SATA ODD never gets spin down request or D1 power event
|
Vista
|
|
2554879
|
Driver property page port location information is incorrect on
Cantiga
|
Windows XP
|
|
2555515
|
system lock due to low memory - with DVD playing and IO
|
Windows 2003
|
|
2556588
|
Intel Rapid Recover Technology: Degraded/Normal/Master Offline
goes Normal
on failed volume
|
Vista
|
|
2556593
|
Intel Rapid Recover Technology: Degraded/Syncing state, recovery
disk failure/remove does not match state table
|
Vista
|
|
2556715
|
Intel Rapid Recover Technology: Sync does not re-start with
invalid partner in manual sync mode
|
Vista-64
|
|
2556718
|
Intel Rapid Recover Technology: Basic Mode - Extra port number
shown on the right side of the Volume Picture
|
Vista, Vista-64, Windows XP
|
|
2556799
|
Intel Rapid Recover Technology: Fast sync log is corrupt if no
data is written to new volume
|
Vista-64
|
|
2556732
|
DC Mode – “ Enable continuous mode” button label does not change in basic mode
once the recovery volume level is changed from 'request' to 'continuous',
|
Windows XP
|
|
2556766
|
Modification of one volume fails during migration of a different
volume
|
Vista,Vista-64,Windows
2003,Windows XP,Windows XP-64
|
|
2556767
|
Creating a volume from an existing disk during migration of
another volume returns an error message that the existing the wizard need to
close before opening a new wizard
|
Vista,Vista-64,Windows
2003,Windows XP,Windows XP-64
|
|
2556995
|
UI_HEB_ARA: Unlock Hard Drive messages need to be RTL-enabled
|
Vista
|
|
2557173
|
ATA command SET MAX ADDRESS EXT does not work properly on
Vista64
|
Vista-64
|
|
2662461
|
Action unavailable to “Delete volume” or “Reset HDD to Non RAID”
in Intel® Matrix Storage Manager console, when you try to delete a unsupported
recovery volume or reset the member disk of the recovery volume under Intel®
Matrix Storage Manager console on ICH9R
Workaround: To delete recovery volume or reset disk to non RAID, go to
OROM UI
|
Windows XP-64
|
|
2662524
|
0xD5 BSOD with Driver Verifier While Hot Plugging from one drive
to another on same port
|
Vista-64
|
|
2662475
|
A Dirty Shutdown of a Recovery volume while in DC mode will
cause the volume to fail instead of causing the fast-synch log to be
invalidated
|
Windows XP
|
|
2556947
|
0x7B BSOD after install driver in AHCI mode when drive with
metadata in the system
|
Vista-64
|
|
2662540
|
RAID volume rebuilding happens on different volume than it is
suggested by UI Wizard when two degraded volumes are available on the system
|
Windows XP
|
|
2662548
|
Text misaligned in Modify Volume Wizard 3rd screen
|
Vista
|
|
2662561
|
Intel matrix storage manager stall I/O to a disk connected with
bad sata cable and does not restart
|
Vista
|
|
2662520
|
Intel Rapid Recover Technology: UI wizard allows user to select
non-OS drive as a master drive when there are only 2 drives
|
Vista
|
|
2662523
|
Creation of raid volume failed when another drive [which is not involved
in setup] is pulled out. Issue does not occur with scenario "create from
existing"
|
Vista
|
|
2662501
|
UI_HEB_ARA: Bitmap image appears in title of Create Recovery
Volume Wizard screens
|
Vista
|
|
2687790
|
HIPM/DIPM mixed mode-Device
Initiated Power Management is not working for SATA ODDs
|
Vista
|
|
2687769
|
UI-ARA-HEB-ELL-RUS-8.5.0.9154-MUI RCR: Port names are corrupted
in the Basic Mode after creating RAID 1 volume
|
Windows XP
|
|
2330162
|
UI Progress dialog: progress bar missing, bitmap corrupted or
missing, or cut text.
|
Vista
|
|
2330169
|
CHS: Next button corrupted on Welcome screen of Create Recovery
Volume Wizard, Convert Recovery Volume to RAID 1 Wizard, Convert RAID 1 to
Recovery Volume Wizard, and Modify Recovery Volume Wizard.
|
Vista
|
|
2332390
|
JPN: inconsistent font style and font size in Create Recovery
Volume dialog
|
Vista
|
|
2556995
|
UI_HEB_ARA: Unlock Hard Drive messages need to be RTL-enabled
|
Vista
|
|
2687830
|
UI(ELL/HUN): Cut text in dialogs with " - Encrypted"
string
|
Vista
|
|
2687894
|
UI-HUN-1019-The first option-" Enable Continuous
Update"- on the right click menu of recovery Volume has corrupted
characters.
|
Windows XP
|
|
2687971
|
UI-CHT-Incorrect Translations on Error message when migrate a
volume with encrypted hard drive
|
Vista
|
|
2687995
|
When a missed locked member disk of a degraded raid1 volume is
plugged back and unlocked in the BIOS,
the locked member disk of the raid 1
volume shows a status of "failed" in the IMSM UI or "Error
Occurred" status at the OROM UI
|
Windows XP
|
|
2688016
|
Reads to a pass-thru drive hang during migration of 3 drive RAID 0 volume to 4 drive RAID 0 volume and intermittent
BSOD happens upon deleting the volume after hang when the Intel matrix
storage manager console is open
|
Vista
|
|
2688060
|
Expansion of volume failed from four disk RAID5 to five disk
RAID5
|
Vista-64
|
|
2688076
|
After enabling recovery drive in OROM and rebooting to OS upon
master drive failure, Intel Matrix Storage Console failed to display the
“Switch to Advance Mode View” button and partially displayed the Basic Mode
GUI.
Workaround: Go to “View->Advance Mode” to see the drives and
parameters
|
Windows XP
|
|
2688092
|
Disk Manager Does Not Show RAID Volume After Unlocking Passwords
on Member Disk(s) in the Intel Matrix Storage Manager console
|
Vista
|
|
2688093
|
A Degrade
Rebuild on a > 2TB volume fails with unexpected verification errors during
a rebuild
|
Vista-64
|
|
2688191
|
Unable to
boot to ‘On Request’ ‘Recovery’ drive that was part of a recovery volume i.e
ghosted when ITM is enabled
|
Vista
|
|
2688235
|
‘reverse sync’
does not continue when master disk is removed during the sync and reinserted
in system
|
Vista,Vista-64,Windows XP
|
|
2688271
|
Attempting
to Cancel Disable Continuous Update Proceeds with Action Anyway
|
Vista-64
|
|
2688316
|
BSOD d5 booting
from recovery disk and setting it to manual sync
|
Vista-64
|
|
2688388
|
Basic
mode UI shows RAID creation options while volume is initializing
|
Windows
XP
|
|
2688437
|
Immediately
After Creating IRRT Volume Selecting Disable Continuous Updates Causes OS to
Hang
|
Windows
XP-32bit
|
|
2688443
|
Basic
Mode Shows Incorrect IRRT Volume Update Status after disconnecting on of the
disks in the recovery volume
|
Windows
XP
|
|
2688453
|
System
Unstable After Entering/Resuming from S3 after RAID volume is unlocked in the
UI
|
Windows
XP
|
|
2688454
|
When a
RAID volume has at least one locked disk in it, the right-click options for the
volume still show options available when there shouldn't be any options
available for a locked volume.
|
Vista,Windows XP
|
|
2688456
|
HDDPWD-Matrix
storage console does not show locked volume icon with RAID 5 volume
containing locked disks
|
Windows
XP
|
|
2688459
|
HDDPWD-BSOD
D5 after disconnecting locked drive during rebuild
|
Vista-64
|
|
2688463
|
HDDPWD-After
Entering BIOS Password for Locked Disk During Resume from S4 Disk/Volume
still shows as Locked
|
Windows
XP-64
|
|
2688466
|
HDDPWD-After
Disconnecting Locked Disk From RAID1/5/10/recovery Volume, the Volume is
Shown as Degraded But is Not Exported to OS
|
Windows
XP-64
|
|
2688468
|
HDDPWD-The
message shown when exceeding the limit for incorrect password entries is misleading
instructing the user to reboot the system to try again instead of shutdown
|
Vista
|
|
2688482
|
After
manual scan in the UI when the drives part of a RAID 1 volume are removed,
volumes will still be shown as degraded, and the drives that were not pulled
in the test are shown as missing
|
Vista
|
|
2688488
|
BSOD 7E
Occurred During Power management and ‘Access recovery drive files’ Cycling
|
Vista,Vista-64
|
|
2688501
|
OS fails to
load When disk write caching is turned Off using HTS721080G9SA00 Drives
|
Vista,Windows XP
|
|
2688691
|
Metadata
is stored on target HDD when the UI blocks creation of IRRT volume
|
Vista
|
|
2723557
|
Full
array expansion w/ new disk fails
|
Vista,Vista-64,Windows XP-64
|
|
2723596
|
7E BSOD
when hot plugging Intel(R) RRT member disk during volume update.
|
Vista
|
|
2723749
|
Hot-plug
e-sata/ODD results in OS and external ports to disappear from UI in AHCI mode
where the disk manager still see's the drives
|
Vista,Windows XP
|
|
2723883
|
No hard
drive or volume status in Basic View when booting from Recovery disk
|
Vista-64
|
|
2723887
|
Disk goes
into unknown state when expanding a RAID5 volume
|
Vista-64,Windows
XP
|
|
2723895
|
Driver
exports recovery disk for IRRT volume when recovery drive is unplugged and
reinserted during a manual sync causing the system to hang on ICH9R
|
Windows
2008
|
|
2723989
|
BSOD 7B
seen intermittently after Win7 install on ICH8R
|
Win7
|
|
2723998
|
Disks going offline after deleting RAID 1 or IRRT volume
Workaround: Win7 includes a change
to mark newly discovered disks offline if they have the same signature as an
already existing disk. This happens in IRRT/RAID1 because the recovery drive
is a mirror of the master. You can manually go into disk management and
mark the disk online to get around the issue
|
Win7,Win7-64
|
|
2724015
|
IMSM 8.9 AHCI driver fails to F6 install and BSOD 7B is seen on
Windows XP OS intermittently
|
Windows XP
|
|
2724018
|
Restart after capacity expansion fails on 2TB testing
|
Win7
|
|
2724020
|
Piketon System locks up during migration and expansion from
RAID0 to RAID5
|
Windows XP
|
|
2688135
|
IMSM Console can configure eSATA HDD as a spare HDD on sku’s that
block ESATA for RAID volume creation
|
Vista-64
|
|
2688381
|
RAID F6 driver when installed twice causes BSOD
|
,Vista
|
|
2688509
|
Automatically DVD playing fail to start with showing Windows
error Dialog with Corel* WinDVD application
|
Vista
|
|
2724057
|
Creation of a RAID 1/Recovery volume from OS results in
intermittent drive hangs and upon reboot marks the source drive as failed.
Volume marked as normal upon rebuild to the failed drive once recovered
|
Vista, Win7
|
|
2724060
|
Recovery volume
is not visible under ‘My Computer’ when Access Recovery Volume selected in
Win 7.
Workaround: Win7 includes a change to mark
newly discovered disks offline if they have the same signature as an already
existing disk. This happens in IRRT/RAID1 because the recovery drive is
a mirror of the master. You can manually go into disk management and
mark the disk online to access the recovery drive
|
Win7,
Win7-64
|
|
2724072
|
PCH
desktop fails transition from Migrating to Normal after Raid Expansion
|
Win7
|
|
2724079
|
Driver
Version not found in System Report on Cantiga AHCI mode
|
Windows
XP-64
|
|
2724082
|
HDDPWD-After
S3/S4 a Previously Unlocked Volume is Shown as Locked But is Exported to OS
|
Win7-64
|
|
2724329
|
Verify Volume
Data finds errors after Win7 upgrade on Recovery volume
Workaround: Set the recovery volume in manual
mode before upgrading to Win7
|
Win7
|