©Copyright 2003-2006 Marvell®.
All rights reserved.
SetupCPAwin.htm created 06-Feb-2006
Readme File for SETUPCPAWIN.exe v6.13.6.2
Marvell Yukon Ethernet Controller Family
This file contains
The Marvell CPA Installer contains the CPA application.
This README file explains how to install the Marvell CPA
Installer on a machine running Windows XP x64 Edition and
Windows Server 2003 x64 Edition..
To install the Marvell CPA, the following file is required:
SetupCPAwin.exe
NOTE:
To install the Marvell CPA make sure that you are logged in
as a user with administrative rights.
To install the CPA, proceed as follows:
1. Execute the setup file SetupCPAwin.exe .
2. Follow the instructions of the installation procedure.
This package has the following limitations concerning
VLAN/TEAM adapters.
Adding a vlan adapter to a team is not supported in this
version.
The EC adapters from the families 8050 and 8035 are
restricted to any TEAM/VLAN operation.
VLAN specific limitations :
1. The adapters from 8052 family support on each port
maximum 4 VLAN IDs.
2. The adapters from 8053 family support on each port
maximum 4 VLAN IDs.
Team limitations :
1. Maximum 2 ports of the 8052 and 8053 adapter families can
be teammed together.
2. In a team are not allowed 2 ports of the 8053 adapter
family .
If you should encounter any problems with your Marvell CPA
Installer, please re-read the instructions above and the
documentation supplied with the operating system carefully.
If your particular problem is not listed or the error
persists, please send your system event log file or at least
the event id number and the logging data (as WORDs) of the
entries made by CPA to our technical support.
For further information please contact support.
*** End of Readme File ***