----- ASUS P6000 Series -----

----------------3D ATI VGA Module-------------------
pa-0409a.zip 	ASUS P6300 Series Notebook with 3D ATI VGA Module. BIOS Rev. 0409 6/24/1999
1.) Change DMI BIOS revision to 0409.
2.) Change release version.
3.) Support 10G hard disk and show correct size in setup and S2R issue.
4.) Upgrade P6 microcode.

pa0408a.zip 	ASUS P6300 Series Notebook with 3D ATI VGA Module. BIOS Rev. 0408 2/25/1999
1.)Support Dixon,Celerom CPUs. 
2.)Restore Dixon,Celeron CPUs L2 cache when restore from RAM. 
3.)Shorten resume from S2R by 3 seconds. 
4.)Fix LOGO image size to 12K. 
5.)Enable flash ROM write protect in post. 

pa0407.zip 	ASUS P6300 Series Notebook with 3D ATI VGA Module. BIOS Rev. 0407 10/15/1998
1).Update DMI BIOS revision information. 
2).Change MAX-1617 conversion rate from 0.125Hz to 8Hz. 
3).Update VGA BIOS. 
4).Disable H/W cursor while suspending to disk. 

pa0406.zip 	ASUS P6300 Series Notebook with 3D ATI VGA Module. BIOS Rev. 0406 09/18/1998
1).First release. 

-------------------2D Neomagic VGA -----------------------
0306.zip	ASUS P6300 Series notebook with 2D Neomagic VGA Module. BIOS Rev. 0306.
1.First release.

0307.zip	ASUS P6300 Series notebook with 2D Neomagic VGA Module. BIOS Rev. 0307. 03/02/1998
1.Support Ultra DMA HDD.
2.Optimize CPU cache speed.
3.Upgrade VGA BIOS.
4.PCI 2.1 compliant.
5.Inhibit displaying Suspend to Disk warning message if user selects Suspend to RAM at BIOS..
6.Enters Supsend to RAM if Suspend to Disk partition does not exist.

0404.zip 	ASUS P6300 Series notebook with 2D Neomagic VGA Module. BIOS Rev. 0404 05/27/1998 
1.Support Pentium II and Pentium CPU.

0405.zip 	ASUS P6300 Series notebook with 2D Neomagic VGA Module. BIOS Rev. 0405 07/15/1998 
1.Fix support for P6 microcode update.
2.Compress anti-virus module in ROM image.
3.Change FIR ID from CAN0002 to NSC6001
4.Add DMI information "CPU external clock" 66MHz.
5.Modify DMI DIMM RAS map to report total memory correctly.
6.Update VGA BIOS to 1.16.
7.Apply Intel's patch to solve repetitively suspend/resume hang.
8.Put solution for system hang under below condition:(set port 8011H bit 2)
	1).Battery low
	2).On board PIIX4E chipset
	3).Ultra-DMA enabled.
9.Only turn off PCMCIA socket power when S2R,and not restore it when resume
(that's PCMCIA driver's job)

0406.zip 	ASUS P6300 Series notebook with 2D Neomagic VGA Module. BIOS Rev. 0406 09/03/1998 
1). Change BIOS revision in post screen.
2). Change BIS revision in DMI string.
3). Save/Restore docking device for suspend/resume.
4). Put solution for LS-120 suspend fail.
5). Visible S2D progressing status bars.
6). Support LS120 boot.
7). Update P6 CPU microcode stepping.
8). Change BIOS SETUP menu "Diskette A:" string to "Floppy Drive" to avoid
    confusion for supporting LS120.

0407.zip 	ASUS P6300 Series notebook with 2D Neomagic VGA Module. BIOS Rev. 0407 2/25/1999
1.)Support Dixon,Celerom CPUs. 
2.)Restore Dixon,Celeron CPUs L2 cache when restore from RAM. 
3.)Shorten resume from S2R by 3 seconds. 
4.)Fix LOGO image size to 12K. 
5.)Enable flash ROM write protect in post. 

pn-0408n.zip 	ASUS P6300 Series notebook with 2D Neomagic VGA Module. BIOS Rev. 0408n 6/24/1999
1.) Change DMI BIOS version to 0408
2.) Change release version.
3.) Support 10G hard disk and show correct size in setup and S2R issue.
4.) Upgrade P6 microcode.


------------- Manual -------------
s_164_p6300.pdf		Spanish
s_166_p6300.pdf		Spanish